Level of DifficultyReally easy
Time to do repairLess than 15 mins
Age of ApplianceMore than 10 years
0 out of 1 people found this instruction helpful
Use nut driver to take off shield. Pull out element to expose element and wire connections. Use nut driver to take off the 2 little screws. Remember what side is positive(red wire) and what side is negative(black wire). Put shield over the 2 wire and reconnect to element. Will need a standard screwdriver for the new screws. Slide wires into insulation and put back on shield.
Were these instructions helpful?
Part Number: PS249483