Plastic Vains had broken off

ApplianceGeneral Electric Refrigerator

ModelGSS25JFPAWW

Level of DifficultyEasy

Time to do repair1- 2 hours

Age of Appliance1 - 4 years

Tools Pliers
Screw drivers

Herbert From Carmichael, CA

Feb 12, 2010

0 out of 1 people found this instruction helpful

remove ice tray - dump ice - remove two screws retaining top plastic guide - remove three screws from bottom front to remove front cover - remove screw from support for metal ice door control arm - pull metal arm ( rod ) out of slot - release the two retaining catches ( one on each side ) on housing and pull housing up and out with the old auger - remove snap ring and unscrew plastic retaining nut - pull off ice crusher parts ( keeping parts in removal order for reassembly ) - put removed ice crusher parts on new auger in same order as removed - replace washer, plastic nut,and snap ring- replace housing with reinserted ice door bar- push housing down to engage retainers -replace metal arm support screw - replace front cover and 3 screws - replace top plastic ice guard with 2 screws- replace ice container in refridgerator. Please excuse any confusion or omissions

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Ice Bucket Auger

Part Number: PS964350

$29.00
In Stock