Oven wouldn't heat

ApplianceKenmore Range


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver

Bob From Casper, WY

Feb 10, 2010

0 out of 1 people found this instruction helpful

1. First unplug the range from the 220 outlet!!

2. Next I used a nut driver to remove the 2 screws that attach the bake element to the rear of the inside of the oven.

3. Pull the element toward the front of the range until you can unconnect the electrical wires by gently pulling on the connectors that attach the wires to the baking element.

4. Connect the new baking element to the electrical wires and re-attach to the rear of the oven with the two screws removed in step 2.

5. Plug the range back into the 220 outlet and test the oven......

It doesn't get any easier than that!! And to think that I was considering calling a repair man......

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Bake Element - Push On Terminals - 240V

Part Number: PS2332301

In Stock