The timer was intermittent and not connecting to ignitor

ApplianceHotpoint Dryer

ModelDLL150RALWH

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver

Mark From Culver City, CA

Feb 09, 2010

2 out of 4 people found this instruction helpful

I pulled the dryer away from the wall unplugged it.
I removed the small back panel just behind the timer switch ( 5 screws for 1/4" nut driver)
The switch has one screw (1/4"nut driver ). Remove it and the timer switch comes away. Disconnect the two electrical connections.(impossible to screw this part up). Reconnect the the new switch to the couplings from the old switch. This part really is idiot proof. There's only one way.
The knife is to pry off the plastic dial from the stem of the old timer. Dial was on tight and the broad blade on the butter knife helped from breaking the plastic dial. Everything goes back together the way it came apart. Blissfully simple. I hope that helps. I felt like a real genius when I was done. Good job Partselect! I have 10 cats.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Timer - 60Hz

Part Number: PS268241

$116.22
In Stock