The washer was stopping at each part of the wash cycle

ApplianceMaytag Washer

ModelMAH4000AWW

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Fred From Riverside, CA

Oct 16, 2007

13 out of 13 people found this instruction helpful

I looked at the exploded view that was posted on the website which was a big help. I took off the back and took off the control knob. I then unscrewed the timer from the console and it took a couple of minutes to realize that the timer moved to the left and had these lugs that anchored it to the console. The fact that there was only one screw should have been a give away. The hard part was disconnecting the wiring plug from the old timer.
The install was in reverse and easy.
The only problem is that while the washer no longer stops at every step of the cycle it still periodically stops at the 2nd and the 3rd rinse.
I don't know what that is, I suspect it is a relay but I am having trouble figuring out which relay it is.
Overall, it ws a piece of cake and the washer does run better.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 22002867 (Now subbed to Timer)

Part Number: PS2020661

$124.20
In Stock