loud noise on spin cycle

ApplianceMaytag Washer

Model

Level of DifficultyEasy

Time to do repairMore than 2 hours

Age of Appliance1 - 4 years

Tools Pliers
Nutdriver
Socket set

Douglas From Eden, UT

Feb 05, 2010

0 out of 1 people found this instruction helpful

I had previously done a partial tear down on the machine to see if I thought I could do the repair. The dealer try's to scare you with warnings about special tools etc. Looked OK and after reading other comments on this site, I thought I would try. The only comment that I would add to what has already said is that you should have the recommended sealer or an equivalent sealer. I used weatherstrip adhesive that I had on hand. Hope that it holds up! Like it says in the directions, the seal will lift up if there is too much sealer under the lip of the seal. Just hold down the seal with a weight until the adhesive sets up and then it will stay. I've fixed cars for 30 years and this was an easy repair comparable to replacing wheel bearings.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Triple Lip Seal and Bearing Kit

Part Number: PS2177502

$103.07
In Stock