Clothes damp when cycle finished.

ApplianceMaytag Dryer

ModelDE608

Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers
Wrench(Adjustable)

John From San Antonio, TX

Feb 05, 2010

0 out of 1 people found this instruction helpful

1. Thought I had a clogged duct or vent so I changed the duct. No clog, Problem continued. 2. Checked the heating element for damage, none noted. Quite a lot of lint under the dryer drum where the element was located so I cleaned the area. 3. Decided to replace the sensor that detects the dryness of the clothing, and while waiting for the part I was told by a friend to clean lint from the upper limit sensor mounted in the housing of the heating element. Cleaned upper limit sensor and replaced dryness sensor at the same time. Problem resolved. 4. Replaced Lint Filter to try and prevent lint build up.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Lint Filter

Part Number: PS2035152

$15.25
In Stock