No water, went right to agitate cycle

ApplianceGeneral Electric Washer


Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Michael From Steger, IL

Feb 04, 2010

4 out of 6 people found this instruction helpful

When I would set my washer to a specific setting, it would skip the water fill cycle and go directly to the agitate cycle. Would not get water at all, hot, cold, or warm. I removed the control panel with a torx (star) bit in which the screws were on top behind the panel. The pressure switch was on the left side of the panel. The switch actually twists out. There are no screws or other hardware holding it in place. Very convenient. All there was to the switch was 2 wires and a vaccuum hose line. Very simple repair. Washer works great.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Level Pressure Switch

Part Number: PS269904

In Stock