No agitation or spin

ApplianceWhirlpool Washer


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Pliers
Screw drivers
Socket set

erik From san jose, CA

Feb 04, 2010

0 out of 2 people found this instruction helpful

lt7000xv - washer/dryer stack

removed the center panel between the dryer and washer.

unplugged the machine

removed the two clips to release the top/lid.

slid the top/lid assembly off

removed the small metal stability corner cross piece.

removed the top two screws of the front panel

lifted the front panel up and away (if it feels stuck, just put some muscle into it)

unplugged the wiring harness from the motor

removed the two big bolts at the bottom front that secure the tub in place

to be able to pull the tub out...

reached behind and to the right to remove the pressure hose

released the wiring from the tub

released the drain hose from its clip

pulled out the tub far enough so i could work on the motor.

on the motor, unscrewed and removed the two clips (top/bottom) to gain access to the coupling.

replaced old with new.

i thought lining everything up so i could slip the motor back on would be difficult since its tough to see where the teeth on the coupling are going, but it was kind to me and fit into place on the first try.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Direct Drive Motor Coupling

Part Number: PS1485646

In Stock