Level of DifficultyEasy
Time to do repair30 - 60 mins
Age of ApplianceMore than 10 years
7 out of 8 people found this instruction helpful
Removed oven door and burner guard. Removed screws holding ignitor bracket and small panel beneath oven door. Disconnected ignitor wires behind panel and pulled out ignitor. Removed old ignitor from bracket and inserted new unit. Fed wires back down thru tubing and screwed in bracket. Connected wires and replaced panel. (Note: old ignitor glowed but would not pass enough current to operate gas valve)
Were these instructions helpful?
Part Number: PS2034118