Level of DifficultyReally easy
Time to do repairLess than 15 mins
Age of Appliance1 - 4 years
Erich From Atlanta, IN
Jan 28, 2010
0 out of 1 people found this instruction helpful
First, DISCONNECT POWER! After opening the door I took all the screws out except the screws on each side next to the hinge. this will help the inside panel from sliding off when you raise the door up to get the assembly out. Once i got all the screws out the handle assembly was ready to pull the wire harness off. you can pull the assembly just outside the edge of the inside panel before any wires get pulled or insulation comes loose. i had to tug more then i thought i needed to but after working it back and forth it came off. after each side wiring was off, i took the broke one out and reattached the wires to the new one, reset the handle in the door in the molded spot, put screws back in and all done! no more doing dishes the old way! Good luck, took longer to open the package then replace the door latch.