Level of DifficultyA Bit Difficult
Time to do repair30 - 60 mins
Age of Appliance5 - 10 years
0 out of 2 people found this instruction helpful
I removed existing ice maker by removing one screw and dsconnecting the wire harness. I put new ice maker in place but found out that the new harness was about three inches shorter than the original. After several frustrating minutes, I remove the front cover of the original IM and released the connector for the old harness. I then did the same with the new one. I put the old harness on the new IM and reinstalled it then connected the harness and started making ICE.
Were these instructions helpful?
Part Number: PS1734740