No water to ice maker

ApplianceWhirlpool Refrigerator


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Nutdriver

Wain From Valrico, FL

Jan 24, 2010

1 out of 4 people found this instruction helpful

I shut off water to the fridge and then unplugged it. I used an adjustable wrench to remove the water line from the unit. I took a 1/4-inch nut driver and removed the screws holding the access panel and the 2 screws that hold the unit to the fridge. I disconnected the 2 electrical connections and all the tubing going into the unit. I reconnected the electrical and the tubing and reattached the unit to the fridge then replaced the access panel. I reattached the water line, plugged fridge back in and turned on the water. I flushed the line for about 2 minutes. It was a very easy process. It took approximately 5 hours for the first cubes of ice to drop so be patient.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Inlet Valve Kit (Now subbed to Water Inlet Valve)

Part Number: PS3497634

In Stock