turned switch to run but dryer wouldn't.

ApplianceGeneral Electric Dryer

Model

Level of DifficultyReally easy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers

BRAD From Vancouver, WA

Jan 13, 2010

0 out of 1 people found this instruction helpful

I removed the two screws inside the door and popped the top loose. I took the top off to see and have access to the interior. I leaned the front out and inserted the belt around the drum (with my wife's help), replaced the screws and laid the dryer on it's face on a rolled up blanket and proceeded to run the belt around the pulleys (two). The drive pulley was easy but the idler pulley, not so easy. I had to figure out how the pulley arm was supposed to provide tension on the belt. I figured it out by looking at the diagram. It was then I found the idler pulley was broken and fell apart in my hand. I advise that a new pulley be installed at the same time as the belt. Everything I read on your web site helped.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Drive Belt

Part Number: PS1766009

$19.98
In Stock