The ceramic insulator on the burner ignitor cracked & the spark shorted so that the burner would not ignite.

ApplianceJenn-Air Range

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Loren From San Luis Obispo, CA

Jul 05, 2007

20 out of 22 people found this instruction helpful

Firts I removed the 2 screws that held the burber in place. Then I lifted the burner up & disconnected the wire that connected to the ignitor. Then I removed the one screw that held the ignitor to the burner. I then reversed these steps, replacing the cracked ignitor with the new one, replaced the screw holding it to the burner, then reconnected wire, returned the burner to the stove and replaced the two screws that held it. All Done!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 74009336 (Now subbed to Burner Electrode)

Part Number: PS2086773

$15.84
In Stock