Upper rack sagging from broken wheel mount

ApplianceJenn-Air Dishwasher

Model

Level of DifficultyEasy

Time to do repairLess than 15 mins

Age of ApplianceMore than 10 years

Tools

Robert From San Ramon, CA

Jan 09, 2010

1 out of 2 people found this instruction helpful

Removed the white mounting strip on the right side of the upper dishwasher rack by aligning the v-shaped slot. Note that one slot that's aligned with the "v" and push that part through the slot. It will take a slight downward twist to align the second slot, then push that slot downward as well.

I popped the mounting strip from the wheels (the front mount on the mounting strip was damaged to it came out easily). Put the mounting strip back in through the "v" slots (reversing the above direction starting with the slot that aligns at a slight angle first), then snapped the wheels back into the mounting strip.

One note when ordering is that the picture shows the strip with wheels, but the strip came without wheels. Fortunately, the existing wheels worked OK, but be aware that you should order the wheels separately if they're damaged as well.

No tools required and the only tricky part was figuring out now to get the "v" in the mounting strip aligned with the slots (and doing it in the right sequence.)

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Wheel Mounting Strip Only - NO Wheels

Part Number: PS2099474

$19.89
In Stock