One burner would continually keep sparking after burner ignited

ApplianceJenn-Air Range

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Michael From St Louis, MO

Dec 30, 2009

2 out of 3 people found this instruction helpful

Removed the small access cover on the bottom of the cooktop by reaching inside and under the cabinets. Removed the module which was held by two hex head screws, unplugged the wires noting the location and color of the wires. Plugged the wires into the new module in the proper locations as noted previously. Attached the module with two screws, and then attached the cover/access plate with two screws. Problem resolved, repair was easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Spark Module (Now subbed to SPARK MODULE 0+4 REIGNIT)

Part Number: PS8691157

$162.94
In Stock