Control Panel not functioning correctly

ApplianceMaytag Dishwasher

ModelMDB6600AWW

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

David From Chelsea, MI

Dec 30, 2009

8 out of 11 people found this instruction helpful

Control panel buttons would not respond correctly. Ran Sales Demo mode as prescribed in the field repair manual - manual states that if sales demo mode does not perform as described, replace the control panel; this was the case. Removed panel and noticed corrosion in the cable from the control panel - I suspect this was causing the signal from panel to board to malfunction.
1. cut power and remove back cover of door (screws)
2. remove control panel (bolts). Remove cable from control board.
3. Plug cable of new panel into board
4. bolt in new panel
5. Make sure to line up vent seal and door latch. Screw door back in and power on.

Note that a new vent seal came with my control panel. Since it was listed as a separate part, I added one to my order, however it was not needed. Could have left it out and saved 3 dollars.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Control Panel with Touchpad

Part Number: PS2340952

$164.02
In Stock