Oven not heating up properly, taking way to long, not maintaining temperature, poor performance. (45 min to heat up to 350)

ApplianceMaytag Range


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Stephen From Wolcott, CT

Dec 30, 2009

2 out of 4 people found this instruction helpful

Change Temp Sensor-Turn off the power or unplug unit, remove oven racks, removed the two screws that hold temp sensor, pull out and unplug.
Change Igniter-Remove two front screws holding bottom cover on and lift out of place, next remove the two wing nuts holding square plate on, next remove the three screws holding gas tube in place, remove gas tube pulling wire carefully through and unplug it. Remove the two screws that hold igniter to gas tube. I found it easier to pull stove out and remove back bottom left square cover held in with four screws to fish the igniter cable back through.
Oven now heats to 350 in 8 minutes.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Long Oven Sensor

Part Number: PS1570174

In Stock

Bake Igniter

Part Number: PS2084986

In Stock