Burners were leaking gas, igniters didn't work

ApplianceJenn-Air Range

Model9860

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Wrench set
Pliers
Screw drivers
Wrench(Adjustable)

Mitch From San Jose, CA

Dec 29, 2009

6 out of 10 people found this instruction helpful

I had to use a pipe wrench to remove the burners. They were pretty stubborn to remove from the insert. Once this was done, I installed the ingniters into the underside of the burner, then installed the venturi tubes. After that, installing the burners only took simple placement and a quarter turn to lock them in. I adjusted the burner with a screwdriver and wrench as per the manuals instructions and that is all it took. I did a repair that cost me approx $150.00 to all 4 burners instead of buying two complete new burner inserts for $600.00 and it took less than 1 hour to do. I would do it again anytime.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Top Burner Igniter

Part Number: PS2082000

$15.25
In Stock

ORIFICE #

Part Number: PS2086893

$4.60
In Stock

Front Burner Tube (Now subbed to USE WPL 74005894)

Part Number: PS3406619

$53.87
In Stock

VENTURI (Now subbed to USE WPL 74005895)

Part Number: PS3406620

$65.68
In Stock