Washer would dance all over basement when on spin.

ApplianceMaytag Washer

Model

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Wrench set
Pliers
Nutdriver

Jack From Doylestown, OH

Dec 25, 2009

0 out of 2 people found this instruction helpful

After unplugging washing machine, I lifted the top to access two screws that held on front of machine. I removed the old springs with vise grips. I removed the two screws holding the motor to remove the drive belt then the drum could be lifted to replace the snubber. Drop the drum back down and tilt the machine back so the drive belt can be placed back on the drum, motor and water pump pulleys. Reinstall the motor screws. Install the new springs, this can be difficult, I used a board to stretch the springs. Put front back on and do your laundry.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Snubber Ring

Part Number: PS1792928

$4.75
In Stock

Suspension Spring

Part Number: PS2017706

$25.30
In Stock