Broken Glass Main top

ApplianceGeneral Electric Range


Level of DifficultyEasy

Time to do repair1- 2 hours

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

David From Olney, MD

Dec 22, 2009

16 out of 19 people found this instruction helpful

Unplug main power plug. Removed two philips head screws on the sides near the rear of the stove. Removed the four knobs and four switch brackets. Remove Panel Overlay. Remove two outer hex screws and remove Insert Panel for the controls. Do not remove the controls from panel! Pull Insert Panel out just far enough to remove the four hex screws for the Panel Control Assembly and the four hex screws for the Glass Maintop panel. Un-plug the 9-pin and 6-pin connectors for the burners. (Can't be put back together wrong!) Remove the Glass Maintop and place upside down on a table. Put the new Glass Maintop upside down next to it. Remove the hex screws that hold the burners onto the old Glass Maintop. With the help of another person, pick up the four burners and move them to the new Glass Maintop and reinstall hex screws. I would replace the Module indicator light, because the plastic clips will break off when removing it from the old Glass Maintop. Reverse the previous steps. Note; New Glass Maintop gaskets come with the new Glass Maintop.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Glass Main Top - Black

Part Number: PS1481712

In Stock