Dryer squeaked like crazy for at least half a year!

ApplianceGeneral Electric Dryer


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Troy From Lafayette, CO

Dec 22, 2009

2 out of 2 people found this instruction helpful

I read the other repair instructions on this site and looked at the parts diagrams. It wasn't entirely clear how everything came apart but once I started by unscrewing the top of the dryer and removing it (screws were just inside the dryer door) it was easy. Unscrewed the front panel next , swung it out, and it was quick work to install the new bearing with the slides. It wasn't too clear in the parts diagrams but I did need two each of the dryer drum slides and front dryer drum slides, four total, two on each side of the drum bearing. The dryer had been running on the old drum bearing itself, the old slides had worn completely down and the bearing itself was starting to disintegrate too. If I'd caught it sooner I could have reused the bearing and just replaced the slides. Saved a lot of $ and the dryer is nice and quiet again!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Front Dryer Drum Slide (Now subbed to Drum Bearing Slide - White)

Part Number: PS755842

In Stock

Dryer Drum Slide (Now subbed to Drum Bearing Slide)

Part Number: PS6447706

In Stock

Front Drum Bearing (Now subbed to Top Bearing)

Part Number: PS9493079

In Stock