leaked water when agitating in wash cycle

ApplianceMaytag Washer

Model

Level of DifficultyA Bit Difficult

Time to do repairMore than 2 hours

Age of ApplianceMore than 10 years

Tools Wrench set
Nutdriver
Screw drivers
Socket set

Jonathan From Lavonia, GA

Oct 06, 2007

30 out of 31 people found this instruction helpful

First I removed the screws that held the side panels on at the bottom, then I removed the screws that held the front panel on and removed the panel. I removed the agitator, loosened the retaining nut with a hammer and a punch, removed the bolts holding the tub springs, removed the bolts for the top panel and flipped it out of the way. Then I removed the clamp for the inner tub and pulled it out, then I pulled the outer tub out. Then I removed the seal and scrubbed the rust off the seal mating area, then installed the new seal and re-assembled the washer. It works perfectly now and no longer leaks and it is over 20 years old. This is the first bit of problem we have had out of this machine, the lonely Maytag repairman commercials are true.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Tub Stem Seal and Hub Assembly (Now subbed to Mounting Stem/Tub Seal Kit)

Part Number: PS2351899

$67.86
In Stock