Due to over loading of the dryer the drum ruined the slides and was making a bad noise due to plastic rubbing plastic

ApplianceGeneral Electric Dryer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Matthew From Plainfield, IL

Dec 17, 2009

466 out of 468 people found this instruction helpful

It was pretty easy. After already taking apart the dryer to install a new belt I knew exactly my plan of action. I removed the two screws that hold the top panel of the dryer to the front panel. I then removed the top panel and removed the screws that hold the front to each side panel. I than pulled the front away from the cabinet and drum. I put the new slides in place and installed a new felt strip. I put it back together and that was that. Very easy.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Front Dryer Drum Slide (Now subbed to Drum Bearing Slide - White)

Part Number: PS755842

$6.92
In Stock

Dryer Drum Slide (Now subbed to Drum Bearing Slide)

Part Number: PS6447706

$4.23
In Stock

Lower Front Felt Drum Seal (Now subbed to FELT TRAP DUCT)

Part Number: PS9861764

$5.55
In Stock