Dryer timer operation was restricted causing multiple broken (plastic) knobs.

ApplianceGeneral Electric Dryer

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Screw drivers

Gary From Brooklyn, WI

Dec 16, 2009

38 out of 48 people found this instruction helpful

Turned off the electrical breaker to the dryer.
Removed the three screws holding the control panel. Removed the old knob. Tilted the control panel forward to expose the wiring and controls. Removed the screw holding the old timer and loosened the timer - leaving the wires hooked up. Then I removed one wire at a time and reconnected to the corresponding terminal on the new timer until all of the wires were connected to the new timer. Replaced the timer and re-assembled the control panel on the dryer - turned the electric breaker back on.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Knob

Part Number: PS2370714

$3.00
In Stock

Timer - 60Hz (Now subbed to Timer)

Part Number: PS9491768

$45.50
In Stock