Clothes would not dry on automatic setting

ApplianceMaytag Dryer

ModelSE1000

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

George From Smithfield, KY

Oct 05, 2007

19 out of 27 people found this instruction helpful

1: (Automatic Dry Sensor) Removed 2 screws holding front panel, then removed 2 screws holding automatic dry sensor to inside of tub. Disconnected 2 wires from under side of sensor and removed sensor. Placed new sensor in place, reconnected wires, and reinstalled 2 screws. Finally, put cover in position and secured with 2 screws.

2: (Pilot Lamp) Removed 2 screws at bottom of washer front panel. Pulled bottom of front panel forward and removed from unit. Pulled lamp socket from clip, replaced bulb, and replaced lamp socket in clip. Reattached front cover.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Automatic Dry Sensor (Now subbed to Automatic Dry Sensor with Mounting Screws)

Part Number: PS1595603

$24.14
In Stock

USE MAC 31001575 (Now subbed to Cylinder Light Bulb)

Part Number: PS2031074

$4.46
In Stock