Ice not dispencing

ApplianceMaytag Refrigerator

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Frank From Rocklin, CO

Dec 15, 2009

0 out of 1 people found this instruction helpful

Removed icebin from refrigerator and placed it in sink. Saw the iced over hole where the motor mount used to be. Removed screw from under shelf with nut driver. Used a hair dryer to melt ice buildup from shelf (don't forget towels to soak up water). Remove the shelf out 6" to unplug harness from back wall. Pull shelf out onto counter to remove all screws. To remove u bracket from motor gently tap bracket with hammer to "break loose" bracket from motor. Put the motor shaft through new shelf hole and attatch screws and u bracket. Put shelf back in and reconnect wire harness to wall. Test the motor by pressing sensor to dispense ice. If all works Finnish reconnecting and put ice bin back in to collect ice. I emptyed my ice bin prior to putting back in.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Ice Enclosure

Part Number: PS2060964

$73.73
In Stock