Squealing/rubbing noise clothes getting stuck

ApplianceGeneral Electric Dryer


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Lee From Little Egg Harbor, NJ

Dec 14, 2009

1 out of 2 people found this instruction helpful

Removed the screws (torx head) from the top of the control panel and pulled out of the way.
Then remove the top cover gaining access to the inside. Removed two screws near top inside of front panel, 5/16" nut driver. Then removed front wear the front bearing guide is. The old guide was worn thru badly. Removed the bearing guide, snaps out, but it took a little effort. After cleaning installed parts and make sure you secure the felt at the ends. Reassembled in reverse order. The dryer works great now, no clothes are getting eaten and it is much quieter.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Front Drum Bearing

Part Number: PS267867

In Stock

Drum Slide Bearing

Part Number: PS267877

In Stock

Air Duct Felt Seal

Part Number: PS268331

In Stock