screw part(top of agitatot) not moving , bottom ok

ApplianceWhirlpool Washer

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers
Socket set

kevin From tobyhanna, PA

Dec 10, 2009

0 out of 1 people found this instruction helpful

remove cap on agi to reveal the bolt. remove bolt with socket. remove entire agi. seperate top(screw) from bottom(blades) to access worn out agi(no teeth). replace agi they drop in. keep upside down and slowly lower bottom into top without displacing dogs. carefully lower onto shaft make sure they dont seperate(top/bottom or you drop dogs out of place) if all is ok replace bolt, cap and wash. if agis went in correctly screw will only go clockwise.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Agitator Directional Cogs

Part Number: PS388034

$3.61
In Stock