Spray arm mount broken and supply tube cracked

ApplianceWhirlpool Dishwasher

ModelGU980SCGB0

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Dennis From Yorktown, VA

Dec 09, 2009

1 out of 2 people found this instruction helpful

First, I compared the parts visually. The mount is a slightly different design. I removed the old mount/spray arm and tube by removing the single screw through the upper mount and un-clipping the rear tube mount. Next I assembled the new parts using the old spray arm as a guide. Note: Installing the new screw for the spray arm into the new mount proved very difficult and I needed to enlarge the pilot hole slightly in order to assemble. I proceeded to attach the new mount to the upper rack and installing the rear tube mount. The new design of the mount eliminated the need for the upper mount and even if I wanted to install it, it will not fit the new design. Overall, an easy repair with a couple of hiccups.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Middle Spray Arm Kit

Part Number: PS382824

$26.57
In Stock

Upper Spray Arm Mount (Now subbed to Upper Spray Arm Mount)

Part Number: PS393037

$3.81
In Stock

Upper Spray Arm Mount

Part Number: PS734018

$3.81
In Stock