clock display had died, a burner switch had failed, touch-button panel ribbon cable was failing

ApplianceJenn-Air Range

Modelsce300060b

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver

Scott From Hellertown, PA

Dec 09, 2009

6 out of 10 people found this instruction helpful

Shut off breaker! Important as switch connectors can easily come in contact with range when dropping control panel out of range face. Removed 4 screws underneath control panel & above oven door. Panel drops out easily. Removed end caps (4 small screws). Reinstall end caps on new touch-control panel. Removed screws from old circuit board/clock to instal new circuitboard/clock on new touch-control panel. Attach ribbon cable from touch panel to circuit board (easy connector, lift ends of connector to raise shim-like piece, insert ribbon, push shim-like piece back in). Remove 2 star screws at each switch(x4) shaft on old panel. Reinstall switches on back of control panel, reinsert screws from front to each switch. And extra set of hands is handy to hold panel while positioning switch and driving screws. Return reassembled control panel to position, drive screws in underneath. Turn breaker back on. Done.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Electronic Clock Control Board

Part Number: PS2077361

$314.75
Recycling Rebate Available
In Stock

Control Panel with Touchpad

Part Number: PS2077671

$215.18
In Stock

Surface Burner Switch (Now subbed to Infinite Switch)

Part Number: PS2375629

$58.06
In Stock