Ice maker Frozen

ApplianceJenn-Air Refrigerator

Model

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers
Socket set

Kevin From Germantown, TN

Dec 09, 2009

0 out of 1 people found this instruction helpful

First I removed the white cover on the front end.
Then, I unscrewed one screw under the icemaker in the freezer wall. Then, gently popped the icemaker out of the two tabs holding it on top. Then I unplugged the wire assembly out of the back of freezer squeezing the two tabs in on the plug. I took the wire assembly off the icemaker by pushing the tab down with a flathead while pulling the plug out. Next,
I transferred the wire assembly to the new icemaker pushing the plug until the tab was fully engaged. Then, using a flashlight and noticing the direction of the plug, I plugged the icemaker into the back wall. Then carefully lined up and worked the icemaker until it popped into the two holding tabs on the sidewall, replaced the screw on the sidewall and put the white cover back on. For note, I noticed on the inside old the icemaker that the teflon coating was peeling off so the ice was sticking and could'nt be pushed out and thus a frozen block Ice maker!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Replacement Ice Maker

Part Number: PS2121513

$109.46
In Stock