Hole/tear appeared in the rubber tube portion of the spray arm

ApplianceKenmore Dishwasher


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Daniel From Seattle, WA

Dec 08, 2009

0 out of 1 people found this instruction helpful

I simply removed the old spray arm paying careful attention to how the parts were originally attached and fitted. Then I assembled and installed the new spray arm.

1) I removed the screw from the bracket in the middle of the upper rack holding the spray arm in place. 2) I romoved the clip at the back of the upper rack holding the other end of the spray arm in place. 3) Once the spray arm assembly was completely removed, I unscrewed the rest of the bracket by remove the only remaining screw from the bottom side of the bracket. 4) I took the new parts and assembled them in reverse order.

Once the last screw was tightened, the spray arm turned freely and I was all set.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Middle Spray Arm Kit

Part Number: PS382824

In Stock