Handle broke and the door would not latch tight causing water to leak around the door.

ApplianceMaytag Dishwasher

Model

Level of DifficultyReally easy

Time to do repairLess than 15 mins

Age of Appliance1 - 4 years

Tools

Marvin G. From North Prairie, WI

Dec 05, 2009

1 out of 2 people found this instruction helpful

First I had to remove the inside door panel, There are 10 screws along the side and top of the inside panel, 4 on top and three on each side. This took about 3 minutes to do, then lift the panel to expose the door latch with switches assembly. Lift out and remove the two electrical plugs to the two switches. Take the new latch assembly and attached the two plugs to the blades on the switches and placed in position on the door. Placed the inside panel in place and installed the torx screws. In all this took less than ten minutes to do.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Door Handle and Latch Assembly with Switches

Part Number: PS2180047

$23.96
In Stock