frost in the freezer

ApplianceGeneral Electric Refrigerator

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Pliers
Nutdriver
Screw drivers

Sergio T From cullowhee, NC

Dec 05, 2009

0 out of 1 people found this instruction helpful

I took the back panel, 2 screws on top ,unscrewed the defrost heater harness . then I used a hair dryer to melt the ice around the coils , also used a piece of aluminum foil to make a tray to catch all the water under the coils to the bucket using the same plastic container a the bottom of the freezer 2 screws and relpaced with the new part . Done ! also I suggest to try to re route the wire to one side to plug its side before you cut them to add the wire included.(that;s what I did ) I hope it can help you . Thank You , Partselect.com . all the comments helped me a lot too..

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Defrost Heater Harness Kit

Part Number: PS1993872

$33.41
In Stock