clothing was getting stuck on inside near top of door

ApplianceGeneral Electric Dryer


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Wrench set
Screw drivers

Robert From Avon, NY

Nov 30, 2009

2 out of 3 people found this instruction helpful

I followed instructions provided by other users of this site. Two screws removed allowed the top to be raised. Two more screws allowed the front to be removed and swung to the side. I removed the felt, and replaced it, after looking which way the bevelled edge faced. The teflon drum slide bearings were simple to replace. The front drum bearing was a little difficult to remove, but I just kept prying with a flathead screwdriver and it eventually began to pop off. I vacuumed and removed a ton of lint from everywhere I could get at, and the dryer now runs quieter with no more clothing getting hung up inside.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Front Drum Bearing

Part Number: PS267867

In Stock

Drum Slide Bearing

Part Number: PS267877

In Stock

Air Duct Felt Seal

Part Number: PS268331

In Stock