water continued to trickle, (sometimes flow), during spin cycle thereby leaving tub with 1/4 to 1/2 filled with water at end of each wash.

ApplianceMaytag Washer

Model

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Wrench set
Screw drivers

Timothy From Stafford, VA

Nov 27, 2009

10 out of 16 people found this instruction helpful

Removed washer top by depressing spring loaded clamps with a screw driver. Tricky part was determining location of clamps so that I knew where to insert screw driver; (I used diagrams of my model found on the Internet). With top lifted up, I located water control valve and removed brackets and plastic fixture surrounding it. Was careful to disconnect electronic wiring into valve. Then removed hoses and replaced with new part. Most of the time spent was diagnosing problem, determining plan for getting access to part, and reassembling without losing parts down in tub area. Saved an estimated $150-250 by doing it myself.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Inlet Hose Gasket

Part Number: PS1975584

$2.70
In Stock

Water Inlet Valve

Part Number: PS2021768

$56.39
In Stock