oven clock and temp display control and door hinge failure

ApplianceJenn-Air Range

Modelww27430

Level of DifficultyA Bit Difficult

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Pliers
Nutdriver
Screw drivers
Socket set
Wrench(Adjustable)

David A From Nellysford, VA

Nov 27, 2009

2 out of 5 people found this instruction helpful

For display replacement: remove top three phillip head screws and four underneath bezel screws. Detach 3 wire harness sockets. With control panel assembly detached from oven face remove two screws holding display control using socket driver and replace with new. Reverse steps for installation.
Hinge replacement: Follow guidelines written by previous comments. Before re-installing door in to oven cavity slots be sure to remove temporary hinge "open" pin (small round-head pin approx. 3/8" long which holds the spring loaded hinge in a position to insert it through the oven door housing assy. slots). Also download the PDF service manual found on the web!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Double Oven Electronic Clock

Part Number: PS2077427

$336.45
Recycling Rebate Available
In Stock

Door Hinge

Part Number: PS2085540

$36.18
In Stock