Door seal would pull out when door opened and cause leak if not pushed back in.

ApplianceKitchenAid Dishwasher


Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Kathy From Cambria, CA

Oct 03, 2007

1 out of 2 people found this instruction helpful

Removed old seal by pulling it out. Inserted new seal by pushing it into the mounting slots using a screw driver, then a putty knife. After installation of the new seal the door was hard to latch (had to push real hard to make it latch). I pushed the seal further into the mounting slot until it didn't seem to change position any more. The door is still harder to close than with the old seal, but it doesn't come loose when the door is opened and no leaks.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Door Gasket (Now subbed to Door Gasket with Strike - Black)

Part Number: PS5136129

In Stock