Ice Maker Leaking

ApplianceMaytag Refrigerator


Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of Appliance1 - 4 years

Tools Nutdriver
Screw drivers

Michael From Omaha, NE

Oct 03, 2007

14 out of 17 people found this instruction helpful

Replacing the icemaker was easy. I unplugged the icemakers wire harness from the refrigerator and then removed three screws. Installing was the reverse of the procedure. I just lined up the single screw of the bracket and the track, reinstalled the three screws and then plugged the icemaker back in. Took less than 15 minutes. After the icemaker got to the right temperature (about an hour) it was making ice again.

I removed the auger, cap, and crusher assembly from the ice bin, by removing the top 2 screws with a small nut driver. Put these parts on the new ice bin and tightened the 2 screws/nuts at the top of the bin and slid the ice bucket back into place.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WPL 67001503 (Now subbed to Crisper Pan - Large)

Part Number: PS2065944

In Stock

USE WPL 67005959 (Now subbed to Ice Bucket)

Part Number: PS2069587

In Stock

Ice Maker Assembly (Now subbed to Replacement Ice Maker)

Part Number: PS2121513

In Stock