Noticed a small seepage of water at the lower corners of the dishwasher door. Gasket had become hard and unpliable. Bottom part of gasket had come out of channel and would not stay in place.

ApplianceGeneral Electric Dishwasher

ModelGSD4920Z02BB

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of Appliance5 - 10 years

Tools Nutdriver
Screw drivers

Joseph From Spartanburg, SC

Nov 21, 2009

27 out of 33 people found this instruction helpful

I had replaced the door gasket a few years earlier and had difficulty fitting the gasket around the bottom corners. This time I removed the plastic inner door panel for complete access to the gasket channel. I opened the new gasket package and let it stand unrolled overnight to remove the kinks. Once the old gasket was removed I took a thin piece of wood wrapped with a cloth to clean out the gasket track. The gasket snaps in easily. Be careful not to over stretch the gasket around the bottom corners. The curve of the gasket will resemble the curve of the door panel when set correctly. This is where I had trouble earlier when I tried to set the gasket in the channel with the door panel still attached. It is much easier to do this with the door panel removed.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Gasket Insert

Part Number: PS258653

$9.20
In Stock

Door Gasket - White

Part Number: PS258654

$14.27
In Stock