Replacing still working but old and stained levers

ApplianceWhirlpool Refrigerator

ModelED25RF

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Mario From Oklahoma City, OK

Nov 19, 2009

22 out of 29 people found this instruction helpful

The overflow grille was no problem. It just slides out. To get to the levers, you need to remove the front cover trim. Pay attention to where everything is before you remove parts and how the wiring is set up (over or under parts). There are two slots below the trim, use your blade screw driver and pop the trim. You'll notice that the 4 buttons for ice (crush - cube) and the light (off-on) are on that panel. I don't recall well, but I believe two screws (one at each side) hold that part in place. Once loose, I flipped it up, disconnected the white multi- wire quick connector and used duck tape to tape the panel to the door and keep it out of the way. Another screw keeps the levers in their place, with a metal element. Remove it and the levers will come out. The ice guide just snaps out from two sides and a middle plastic hook of the ice dispenser lever. Replace everything in reverse order. That's about what I remember. Hope it helps.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Ice Guide

Part Number: PS327358

$9.60
In Stock

Ice Dispenser Lever - White (Now subbed to Ice Dispenser Arm - White)

Part Number: PS327381

$35.73
In Stock

Water Dispenser Lever - White (Now subbed to Water Dispenser Arm)

Part Number: PS327390

$35.25
In Stock

Dispenser Grille

Part Number: PS327871

$28.84
In Stock