Ice in the freezer compartment

ApplianceGeneral Electric Refrigerator


Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Screw drivers

Thomas From Hummelstown, PA

Nov 17, 2009

0 out of 1 people found this instruction helpful

After turning of and unplugging the refrigerator, it consisted of removing the screws on the back panel. The old part had three fitting with compression nuts. I was surprised to find the new part only had onecompression nut on the water supply and the other two lines were "slip" fittings. I was a little concerned about using the existing tubing, but had no leaks. I checked to make sure the water dispenser was working before I pushed the unit back and good that I did because I had inadverently switched electrical connections. Overall, this was still an easy job.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Dual Inlet Water Valve

Part Number: PS901314

In Stock