Heat come up about 150 degrees and stop.

ApplianceGeneral Electric Range

ModelJGSP31GER3WG

Level of DifficultyReally easy

Time to do repair1- 2 hours

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

Nopadon From Arden, NC

Nov 12, 2009

13 out of 19 people found this instruction helpful

I removed the whole unit out by pulled the plug at the bottom and pulled the unit out, unplug the power cord , turn the gas line off, separate gas line from the stove. I pulled the unit out to have more room for me to work on it. I took the top part out and right hand side panel out. Now you can see the old clock/oven control (ERC II C). I wrote down the color of wire to the lettering on the controller board. I pulled the wires out from the old one. Then I put wires back to the new clock/oven control. I reinstalled and put the gas line back and plug in power cord. I test the unit. It is work very fine.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

CLOCK/OVEN CONTROL (ALSO ORDER CLOCK PLATE ITEM 18 OR 18A)

Part Number: PS238230

No Longer Available