Dishwasher would timer would stick on during wash cycle

ApplianceMaytag Dishwasher

Model

Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools

Randy From Eau Claire, MI

Nov 12, 2009

1 out of 2 people found this instruction helpful

I removed the 8 torx screws from the inside liner of the door. Then disconnected four spade connectors for the rinse aid and other misc. electrical. The timer is located in the top of the door behind the liner panel. There were three screws that I removed with a nut driver and then disconnected the two plug harnesses from either side of the clock assembly plus a spade connector for the ground wire. After that it was simply replacing the clock the same way it came out and reassembly of the wires and door liner. It was very simple and took only a short amount of time to complete.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Hard Water Filming Timer Repair Kit

Part Number: PS1776276

$200.29
In Stock