Door lock switch faulty preventing washer from spinning

ApplianceFrigidaire Washer

Model

Level of DifficultyA Bit Difficult

Time to do repair30 - 60 mins

Age of Appliance1 - 4 years

Tools Pliers
Screw drivers

Jeff From Thousand Oaks, CA

Nov 10, 2009

27 out of 33 people found this instruction helpful

Codes did not point directly to the door lock, so that was a 50/50 between door lock and control board. With top of washer removed door lock is just a couple screws and 3 electrical connections.

Belt was worn and frayed. Belt replacement was tricky because new belt was so tight. Used vice grips to lightly hold belt on pulley while using screwdriver through spokes into tub back to ratchet/control pulley. Not too bad.

Works like new!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

USE WCI 134051003 (Now subbed to Drive Belt)

Part Number: PS1990787

$33.87
In Stock

Door Lock and Switch Assembly

Part Number: PS2367737

$68.60
In Stock