Broken Drum belt

ApplianceKenmore Dryer

Model110700815W

Level of DifficultyEasy

Time to do repair30 - 60 mins

Age of ApplianceMore than 10 years

Tools Nutdriver
Screw drivers

David From Alma, NE

Nov 05, 2009

0 out of 1 people found this instruction helpful

1.removed the top of the dryer.
2. removed the wiring to the door switch.
3. removed the front of the dryer.
4. removed the broken belt .
5. removed the drum .
6. cleaned the inside of the housing so that it was free of dust, and dirt.
7. replaced the drum, making certain that the seals were rinding where they are suppose to.
8. placed new belt on drum, placed the belt through the tension pulley, and on to the motor.
9. I replaced the front of the machine, making sure that the front seal around the opening was in its proper place, and replace the screws with the use of a nutdriver.
10. I reconnected the wires to the door switch.
11. I rotated the drum by hand to make sure it runs freely and seals were operating properly.
12. Then I replaced the top of the dryer.
The job took about an hour to do, and was fairly easy from a diy person. The hardest part was looking for a place to buy the parts for replacement for such and old machine. I want to thank you for being out there.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Multi Rib Belt - 92-1/4"

Part Number: PS346995

$13.44
In Stock