Cold water would continue to run and over flow from washer

ApplianceGeneral Electric Washer

ModelWBSR1060T2AA

Level of DifficultyEasy

Time to do repair15 - 30 mins

Age of ApplianceMore than 10 years

Tools Pliers
Screw drivers

Milton From Riverview, FL

Nov 02, 2009

2 out of 6 people found this instruction helpful

1. Removed 2 knobs
2. Removed 4 screws from the top of front panel and opened
3. Disconnected a small hose and two electrical connection and removed the Water level pressure switch
4. Replaced switch in reverse order
5. Disconnected hot/cold water hoses, removed three screws and four electrical connectors and removed water valve (Valve water)
6. Replaced valve in reverse order
7. Reinstalled front panel with 4 screws and reinstalled two knobs.

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Water Level Pressure Switch

Part Number: PS269790

$30.95
In Stock

Dual Water Inlet Valve

Part Number: PS1155105

$40.51
In Stock