Ice in the door would no longer eject ice; Stuck

ApplianceGeneral Electric Refrigerator


Level of DifficultyReally easy

Time to do repair15 - 30 mins

Age of Appliance5 - 10 years

Tools Screw drivers

Kenn From Shasta Lake, CA

Oct 30, 2009

5 out of 10 people found this instruction helpful

Problem: The hardened ice crushing blades had worn the shaft causing them to "lay over" and get stuck.

Remove the ice maker drawer. On the bottom remove two phillips screws to take off the front cover.

The interior white insert in the front has two tabs that hold it in place. Releasing this is the hardest part. I used a small straight screwdriver to CAREFULLY pry the sides away from the tabs so that it could be lifted out. This removes the whole ice ejector and auger shaft.

Lift out the shaft, leaving the crusher blades in order.

Slide the new auger shaft into the crusher blades, pop in the back part and reassemble!

Help other customers find the most helpful instructions.

Were these instructions helpful?

Diagrams and Parts List for this repair

Part PhotoPart DescriptionPriceAvailability

Dispenser Auger

Part Number: PS1018130

In Stock

Ice and Water Filter (Now subbed to Ice and Water Filter)

Part Number: PS8746144

In Stock